Summary

  • CGI visuals in the Star Wars prequels and sequels often fell short compared to the original practical effects, making the films look worse.
  • Glaring design flaws can be found in certain scenes, such as Plo Koon's cockpit differing from the actual ship model.
  • CGI mistakes, like clone troopers' helmets changing between shots or Anakin's head clipping through a door, were noticeable and took away from the film's immersion.

After the introduction of the innovative and stellar visuals in the original Star Wars trilogy, the prequel trilogy and subsequent sequels had a lot to live up to. The models used to create the look of the first three Star Wars movies were groundbreaking at the time. When the special editions and prequel trilogy came around decades later, George Lucas made the decision to use CGI technology in order to capture the look and scale of larger locations.

However, these computer generated visuals often fell short, unable to match the same quality of the original practical effects. Many look awkward or even distorted, and more often than not the measure of using CGI simply made the films look worse. There remains something uncanny about them, and because these images were made using computers, there was a higher chance of error in these CGI effects. Below are some of the most egregious, beginning with the prequels and carrying on into the rest of the franchise.

10 Plo Koon’s Cockpit Differs From The Actual Ship Model

Revenge Of The Sith

Plo Koon flying his starfighter in Revenge of the Sith
Plo Koon flying his starfighter in Revenge of the Sith

Design flaws are not something that is commonplace in the Star Wars series, but Plo Koon’s ship in Star Wars: Episode III - Revenge of the Sith suffers from a few glaring differences between the inside of the cockpit and what the ship looks like from the outside. From the inside, Plo Koon’s cockpit looks very open, divided into three segments. However, from the outside the ship features only one segment, showing no signs of the open cockpit seen in any close up shots of the Jedi Master.

9 The Millennium Falcon’s Reflection Looks Like A Second Ship

The Rise Of Skywalker

Two Parallel Millennium Falcon Ships In The Rise Of Skywalker

When it comes to Disney’s sequel trilogy, there aren’t many major CGI flaws, but there is one particularly confusing scene in Star Wars: The Rise of Skywalker that features the Millennium Falcon flying through a mirrored city. It seems that somewhere along the way, the ship was accidentally mirrored as well. In this shot, two Millennium Falcons fly opposite one another, leading to a rather entertaining shot that only lasts for a few frames.

8 Sebulba Is Missing From His Podracer

The Phantom Menace

Sebulba Is Missing From His Pod

At the time Star Wars: Episode I - The Phantom Menace initially released, the entire podracing segment was a massive project to undertake. Because it all needed to be made with CGI, there were a lot of things to keep track of, including racers in their pods. However, there is one scene in which Sebulba is racing behind Anakin Skywalker where the alien is actually missing from the pod entirely, leaving an empty vehicle racing at high speeds behind the protagonist.

7 The Textures Don’t Match Up In Attack Of The Clones

Attack Of The Clones

Texture Mismatch In Attack Of The Clones

There are several instances throughout Star Wars: Episode II - Attack of the Clones where textures don’t line up neatly, leaving an ugly line where they would overlap. One of the more obvious instances of this can be seen on the ground during the Battle of Geonosis, where the line cuts across the battlefield to the left alongside a pair of droids. This seems like it would have been not only an easy CGI mistake to fix, but something that could have been avoided entirely.

6 Clone Trooper Helmets Change Between Shots

Revenge Of The Sith

Clones On The Floor Of The Jedi Temple in Revenge of the Sith
Clones On The Floor Of The Jedi Temple in Revenge of the Sith

With so many clones wearing various helmets, it can often be difficult to keep track of them all. However, when a clone’s helmet changes in the blink of an eye between shots, these sorts of things become incredibly noticeable. Somehow down the line in production of Star Wars: Episode III - Revenge of the Sith, the models laying on the floor of the Jedi Temple are generic clone troopers. However, during their attack on the Jedi Temple, they all have the blue markings on their helmets and armor of the 501st.

5 Anakin’s Head Goes Through A Door On Geonosis

Attack Of The Clones

Anakin’s Head Goes Through A Door On Geonosis

Another mistake made during the scenes on Geonosis, this one occurs during the factory segment of the movie. Because the set is almost entirely comprised of CGI during this segment, there is much more room for error. The error here comes when Anakin Skywalker ducks down to make his way through a slow door. With the door being made in post through CGI, Anakin’s head can be seen clipping through the bottom of the door as he ducks through.

4 Padmé’s Dress Is Plugged Into The Wall

The Phantom Menace

Padme’s Dress Is Plugged Into The Wall.
Padme’s Dress Is Plugged Into The Wall.

One of the most stunning elements of the prequel trilogy was Padmé Amidala’s impressive wardrobe. In every scene she was wearing something different, often dressing in the most opulent of regal gowns. One such gown seen in Star Wars: Episode I - The Phantom Menace features several glowing bulbs at the base of the dress. In order to light these bulbs, the dress needed some sort of power source, requiring it to be plugged in. This cord was accidentally left in the final cut, as someone likely forgot to edit it out.

3 Ki-Adi-Mundi’s Lightsaber Changes Colors

Attack Of The Clones

Ki Adi Mundi’s Lightsaber Turns Green

At the beginning of the Battle of Geonosis, Ki-Adi-Mundi’s lightsaber is the color it has always been: blue. When he is seen again later in the battle, his lightsaber has magically changed to green. Finally, when he is seen for the last time, his lightsaber had reverted to blue, which is the color that his lightsaber was meant to be. It is likely that with so many lightsabers and different Jedi, someone on the post-production team simply lost track along the way.

2 The Lava On Mustafar Behaves Oddly

Revenge Of The Sith

Lava On Mustafar Darkened By Shadow

Although at first glance the lava on Mustafar in Star Wars: Episode III - Revenge of the Sith looks quite believable, there are a variety of moments where the illusion begins to falter. Not only does the lava flow change directions between shots, but when a ship flies overhead ,the red-hot glow of the lava disappears entirely. If a viewer notices these errors during the climactic battle between Obi-Wan Kenobi and Anakin Skywalker, it is more than likely they will be taken out of the moment.

1 Anakin's Prop Lightsaber Catches On His Robes

Attack Of The Clones

Anakin’s Lightsaber Catches On Clothes

Also taking place during the scenes on Geonosis, there is a moment in which Anakin Skywalker is fighting with his lightsaber, but it is clear that the prop lightsaber used in filming is caught on his robes. Not only did this make it into the final cut of the film, but the ignited lightsaber is edited on top of it. This doesn’t make any sense from an in-universe standpoint, because in the world of Star Wars, not only should he have burned through his robes, but likely his skin as well.