While Tesla batteries are made to last, a low-voltage battery is an unavoidable situation, so it’s worth knowing how to jump-start one's car if needed. Tesla EVs are bestsellers in multiple countries, with the Model Y emerging as the only electric model to make the list of top-selling cars in the U.S. for 2022. The Model 3 and Model Y are Tesla's most popular vehicles, and constitute the majority of its sales.
Jump-starting a depleted Tesla battery is pretty easy if the driver knows the process. Interestingly, the Model 3 and Model Y share similar methods. However, it should be noted that some Tesla EVs are equipped with lead-acid batteries, while others come with lithium-ion batteries. It's important to confirm the exact type before triggering the jump-starting process. Drivers can confirm their battery type by using the EV's touchscreen. Tap on the 'Controls' option, followed by 'Software,' and then 'Additional Vehicle Information.' Model 3 and Y owners should know that it's best to seek professional help with jump-starting a low-voltage battery, unless it's an emergency. And if drivers must undertake this themselves, having some technical knowledge is advised.
Jump-Starting Lead-Acid & Lithium Tesla Batteries
Tesla warns that neither the Model 3 nor Model Y should be used to jump-start the battery of another car, as it could cause significant damage. Additionally, plugging cables into incorrect points is also unsafe. Jump-starting lead-acid batteries for the Model 3 and Y is possible by following certain steps. The first step is opening the hood. Next, eject the maintenance panel to free the trim clips that support it. If there's a HEPA filter, cautiously bend the filter gasket towards the car's front to access the low-voltage battery.
The next step is linking the low-voltage power supply red positive cable to the red positive terminal on the battery. Tesla says that letting the positive cable graze other metal parts like the battery tie-down bracket may wreck the EV. The black negative cable must also be attached to the terminal of the corresponding color. At this point, drivers need to engage the external power source, which could be a portable jump-starter.
When this is done, drivers should tap the touch screen to wake it up. It may take a few minutes for this to happen. When the external power source has served its purpose, disengage the cables from the battery. Tesla recommends that the black negative cables be taken off first. The final steps involve reinstating the cabin intake trim and maintenance panels in their respective positions, and finally, closing the hood.
For vehicles with a lithium-ion battery, the jump-starting process is quite similar. One of the differences is seen in how the black negative cable is linked. In this instance, the external power source’s black negative wire is connected to the bolt found between the brake fluid reservoir and the front trunk. The bolt serves as a grounding system for the external source. At this stage, the external power source needs to be activated for between 20 and 30 seconds.
When this is done, the driver’s door should be opened and left ajar for two minutes. Once it's confirmed that the EV can shift into Drive mode, the maintenance panel should be returned to its initial position and the hood closed. Tesla advises that the stipulated power supply period shouldn't be exceeded, as the battery may not self-recover, thus preventing the EV from entering Drive mode.